HP 2900

From T2B Wiki
Revision as of 12:28, 26 August 2015 by Maintenance script (talk | contribs) (Created page with " === Initialisation === *Connect serial cable *Setup minicom (<tt>serial port setup</tt>) **device: <tt>/dev/ttyS0</tt> **baudrate: autodetect **<tt>8N1</tt> **no flow c...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Initialisation

  • Connect serial cable
  • Setup minicom (serial port setup)
    • device: /dev/ttyS0
    • baudrate: autodetect
    • 8N1
    • no flow control
  • exit config screen and wait till it connects
    • by default no password is set, so none is propmted for
  • set password
  • users
    • manager prompt
ProCurve#
    • operator prompt
ProCurve>
    • go from operator to manager: enable
    • go back: exit
  • use menu
    • change passwords first (go to Console Passwords)
    • enable IP in Switch Configuration - IP Configuration
  • you can now connect to the switch using the webbrowser
    • loginname is decided based on password (if none is given)


Template:TracNotice